Activated carbon drying furnace

The following is the supporting cooling device of the activated carbon drying furnace. The temperature of the activated carbon processed in the furnace is very high, so it is necessary to configure a Cooling Machine at the feeding end for cooling. The drying furnace and the Activated Carbon Carbonization Furnace have the same advantages, and are also indirectly heated by external heat.

This figure shows the hoisting of the main drying furnace. The activated carbon with high water content is fed from the feeding end of the drying furnace. After the heating of the whole furnace, the tail is discharged. The water content is basically 0

This figure shows the main composition of the Complete Set Of Equipment. The upper part is the drying furnace, the lower part is the cooling machine, of course, there is also the heating source (combustor) and the tail gas treatment system. As required by the customer, the rest will not be shown. There are many kinds of activated carbon drying furnaces, which can be customized according to your requirements.

If you are interested in the Activated Carbon Production Equipment produced by our company, you are welcome to visit and guide our company.