Precautions for use of vibrating screen in flour machine equipment

March 16, 2019

What are the precautions when installing the vibrating screen for the flour machine? The vibrating screen is indispensable in the flour machine equipment. What are the things we need to pay attention to when installing the vibrating screen?

1. When installing, be sure to tighten the screen, because the tension of the screen is an important factor affecting the screening efficiency;

2. Be sure to select a screen with a thicker wire diameter because the installation of the linear screen is relatively cumbersome;

3. When adding clearing nets to the flour machine complete sets of equipment, we must pay attention to the difficulty of screening and the number of meshes of the materials, and cannot be installed blindly;

4. When cutting, the width of the screen and the grid should be the same, and the length must be 50~70mm longer than the grid;

5. If the proportion of the material is large or the number of meshes is high, the appropriate mesh should be added under the screen of the flour machine equipment. The purpose is to support and reduce the pressure on the screening network. Extend its service life;

6. After the grid is assembled to the screen box as required, it is important to extend the screen that has grown out into the corresponding discharge port to avoid mixing phenomenon.

7. When installing the pressure plate in the complete set of flour machine, be sure to pay attention to the flatness and lining the sponge sealing tape with strong elasticity to lock evenly, because this is the key to prevent the occurrence of mixing and the service life of the screen. Important factor

What are the precautions when installing the vibrating screen for the flour machine complete set? The above is a brief introduction to the relevant content. If you have any other doubts, please pay more attention or consult Luohe Hualiang Machinery.

The above is the Precautions for use of vibrating screen in flour machine equipment we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Previou:How to Build A Home Flour Milling Machine

Next:How does the honing machine work in flour processing?